Art. no.: A003-928_Rev 01
Last edited: CW40/2014
13
FEEDBACK SENSOR INCL. TOUCH KEY
USER MANUAL
The feedback sensor incl. touch key is fitted with a maintenance-free rechargeable
lithium-ion 3.6 V/680 mAh battery.
Caution
7.3 Plugging in Bluetooth receiver for sensors
►
Before switching on the THERA-Trainer software, the Bluetooth receiver for
sensors
1
must be plugged into a free USB interface on the control and
display unit.
If the Bluetooth receiver is first inserted after the THERA-Trainer software has
been switched on, it will be unable to make a connection to the feedback sensor
incl. touch key.
If the Bluetooth receiver for sensors is pulled out while the THERA-Trainer
software is turned on, the connection to the THERA-Trainer software will be
interrupted and can only be restored by restarting.
7.4 Starting THERA-Trainer software
►
Switch on control and display unit.
►
THERA-Trainer software starts automatically.
When the feedback sensor incl. touch key is then switched on, a connection is
established. The feedback sensor incl. touch key is now ready for operation.
The user manual for the THERA-Trainer software and control and display unit
must be observed when using the feedback sensor incl. touch key.
This ensures that the feedback sensor incl. touch key connects to the right
system (control and display unit with THERA-Trainer software). Two systems
should never be started at the same time.
8
OPERATION
8.1 Charging the battery
C
V
Incorrect use will result in damage!
Handle batteries with care.
Do not open the batteries.
Protect batteries from extreme heat or fire.
Always have the battery replaced by a trained dealer
Note
Note
1
