THERA-Trainer THERA-fit, Инструкция по эксплуатации

Страница: 30 / 40

| 27 |
Safety stop
THERA-fit plus contains several safety func-
tions that are visible at the light diodes on the
receiver
9 .
Light diode yellow: The device is in stand-by
mode. The unit is ready for use, but has no
signal from the remote control
8 .
Light diode green: Receiver 9 and remote
control 8 are in contact.
Light diode blinks green/yellow: Re-
ceiver 9 and remote control 8 are not in con-
tact. Point the transmitter of the remote con-
trol
8 on the receiver 9 .
Light diode blinks red: THERA-fit plus has
turned off because
❑
min. 4 seconds the pedals have been
blocked,
❑
min. 13 seconds has been no reception of
the remote control,
❑
min. 20 minutes no button on the remote
control was pressed.
To solve this problem remove the blockage,
restart the THERA-fit plus and point the re-
mote control on the device.
Remark: Are device and remote control
coded by your dealer (to be able to use more
than one THERA-fit plus in a room) only the
right device fits together with the right remote
control.
Technical data
(Basic equipment)
THERA-fit THERA-fit plus
THERA-joy 230 V THERA-fit plus
THERA-joy 115 V/
100 V
Length 57 cm
Width 40 cm
Height 31 cm
Weight 9 kg 13 kg
Crank length 102 mm
Speed range 0-60 U/min
Torque range ca. 0-15 Nm
Batteries for display 1 mignoncell R6P AA (1,5 V)
Power connection – 230 V~, 50/60 Hz 115/100 V~, 50/60
Hz
Power consumption – 100 VA 100 VA
Fuse – 2
×
1,6 A sluggish 2
×
2 A sluggish
Used materials Aluminium, steel, polystyrol, polyurethan, etc.
Protective type – I I
Degree of protection – Typ B
Safety rating – I PXO
Noise emission Lpa
≤
70 dB (A) :
Noise emission value according to DIN 45635-19-01-KL2
Remote control – 9-V cube battery 9-V cube battery
Conditions in surrounding
when in use – 5 °C to 40 °C
5 to 93 % Rh
700 to 1060 hPa
41 °F to 104 °F
5 to 93 % Rh
700 to 1060 hPa
Conditions on transport/
storing – –30 °C to 65 °C
5 to 93 % Rh
700 to 1060 hPa
–22 °F to 149 °F
5 to 93 % Rh
700 to 1060 hPa