Themis RES-12XR3, Руководство по установке

Страница: 57 / 146

2—Installation and Operation
Installation Procedures
2-11
Themis Computer
2.1.4 Lithium Battery
2.1.4.1 Removing the Lithium Battery
Perform the following steps to remove the lithium battery:
1. Make sure the system is powered off (see “Operation” on page 2-20).
2. If you cannot access the lithium battery directly, you must move and/or detach
the multiple wire cable routed over the battery (see
Figure 2-10 ).
3. Locate the lithium battery socket and squeeze the latch (see A , Figure 2-11 on
page 2-12) together until the battery lifts out of its socket.
Figure 2-10. The RES-12XR3 Lithium Battery and Multiple Wire Cable
Lithium
Battery
Multiple Wire Cable
Exposed
Battery
Note: The battery location is dependent on which motherboard is in-
stalled in the chassis. Figure 2-10 shows the location of the battery on the
X8DTU-F Motherboard.