Themis RES-12XR3, Руководство по установке

Страница: 58 / 146

2-12
Themis Computer
RES-12XR3 Installation Manual - Configuration 7 Version 1.1
4. Remove the old battery and replace with a new battery (see Figure 2-11 ).
2.1.4.2 Installing a Lithium Battery
Perform the following steps to insert a new lithium battery:
1. Tilt the replacement battery into the empty socket so that it is angled under the
battery latch (see
B , Figure 2-11 ).
2. Carefully press down on the battery until it clicks firmly into place.
2.1.5 SATA II Storage Drive
Perform the following steps to remove and install a SATA II storage drive.
The front bezel (door) of the RES-12XR3 must be unlocked and opened to access
the SATA II storage drives.
Figure 2-11. The RES-12XR3 Lithium Battery and Socket
To release, squeeze the battery latch together…
Battery
A B
Latch
… and remove the battery from socket
Note: For SATA II drives, the left-hand removable storage drive (SATA II ID0)
is designated as the boot drive.