Themis RES-12XR3, Руководство по установке

Страница: 60 / 146

RES-12XR3 Installation Manual - Configuration 7 Version 1.1
2-14
Themis Computer
1. Make sure the necessary precautions have been observed as per the previous
Note (see “Operation” on page 2-20).
2. Locate the drive to be removed.
3. Insert the barrel lock key into the hard drive you want to remove, and turn it
45 degrees clockwise (presuming the storage drive is locked).
4. Firmly push in the latch lock until the latch handle releases from the drive.
5. Grab the latch handle and pull the drive completely away from its slot.
2.1.5.3 Storage Drive Installation
To install a storage drive,
1. Make sure the latch handle of the drive to be installed is in the open position.
2. Properly orient the new drive and insert it into the vacant drive slot. If the
drive cannot be inserted into the slot, rotate it 180 degrees.
Caution: When pulling the storage drive from the chassis, hold it at the bot-
tom to prevent it from falling and damaging the drive.
Figure 2-14.
RES-12XR3 Storage Drive Removal
Insert key into barrel lock and turn
A
… push the latch lock, …
B
Latch
Lock
Latch Handle
… and pull drive out with the latch handle
C
45 degrees clockwise, …
Barrel
Key