Themis RES-12XR3, Руководство по установке

Страница: 56 / 146

2-10
Themis Computer
RES-12XR3 Installation Manual - Configuration 7 Version 1.1
Lower-Right PCI Expansion Slot —Themis has provided a pair of threaded
standoffs to secure the card installed in the lower-right PCI expansion slot to
the motherboard. Remove the standoff screws, install the PCI card into the
lower-right slot, and secure the PCI card with the standoff screws.
Upper-Right PCI Expansion Slot —After installing the upper-right PCI
expansion card, install a PCI Retainer Clip—two if necessary—that was
shipped with your order onto the edge of the PCI card (see
A , Figure 2-9 on
page 2-10), and slide it along the edge until it is positioned over one of the
several slots along the top edge of the RES-12XR3 chassis (see
B , Figure
2-9 ). Press down firmly on the clip until it snaps into position.
4. Attach any internal I/O cables to the installed PCI cards, and carefully fold
and tuck any exposed ribbon cables into the cabinet.
5. If you have no further installations to perform, close the RES-12XR3 chassis
by refastening the top cover removed in Step 1 on page 2-2.
6. Attach all external cables to the I/O faceplates of the installed PCI/UIO cards.
Figure 2-9.
Installation of the PCI Card Retainer Clip
Install a PCI Retainer Clip on
A
the edge of the Top-Right PCI Card.
Slide the Retainer Clip along the edge of the Top-Right PCI Card until it is over a chassis slot, then press firmly into slot.
B
Caution: Be careful not to install a PCI Retainer Clip into one of the longer chassis
slots used to secure the top cover of the RES-12XR3.