background image

PARLOUR PELLET 3000 

PELLET HEATER 

 
 

 

 

INDEX OF CONTENTS 

Appendix A, 22 
Appendix B, 23 
Appendix C, 25 
Appendix D, 26 
Appendix E, 27 
Battery 

installation, 13 
operation, 13 

Battery Light, 13 
Chimney Installation Criteria, 26 
Chrome 

polishing, 15 

Circuit Board Diagram, 19 
Clean Out Tee, 8 
Cleaning 

exhaust fan blade, 15 
fan guard, 15 
fly ash removal, 14 
glass, 15 
gold-plated parts, 15 
heat exchanger, 15 
hopper, 15 

Clearances, 6 

mobile home, 6 
modular home, 6 
to combustibles, 6, 7 

Control Functions, 12 
Dimensions 

overall diagram, 5 

Distance to Openings, 8 
Electrical Schematic, 20 
Exhaust Fan Blade, 15 
Exhaust Pipe Location Diagram, 6 
Fan Guard, 15 
Fine Tuning, 25 
Firepot Assembly, 23 
Floor Protection, 7 
Fly Ash Removal, 14 
Gold 

polishing, 15 

Heat Exchanger, 15 
High Temp/Flue Indicator Light, 13 

Hopper 

clean out, 15 
filling, 11 

Installation, 7 

battery, 13 
clean out tee, 8 
distance to openings, 8 
floor protection, 7 
pipe configuration, 7 
pipe connections, 9 
venting requirements, 8 
wall & remote thermostat, 9 

Introduction and Safety Information, 5 
Laboratory Listing Label, 4 
Lighting Instructions, 11 
Maintenance Procedures, 14 

exhaust fan blade, 15 
fan guard, 15 
glass cleaning, 15 
heat exchanger, 15 
hopper clean out, 15 
polishing gold and chrome, 15 

Outside Air Kit, 5, 6 
Pellets, 11 
Pipe Configuration, 7 
Pipe Connections, 9 
Replacement of Igniter, 27 
Replacement Parts List, 18 
Routine Maintenance, 21 
Start-Up and Operation, 11 

control functions, 12 
control knob, 12 
filling the hopper, 11 
lighting instructions, 11 

Stove Clean Out, 21 
Trim Button, 13 
Troubleshooting, 16 
Venting Requirements, 8 
Wall & Remote Thermostat Installation, 9 
Warranty Information, 30 
Wind Warning, 22 
Wiring Diagram, 20 

Содержание PARLOUR 3000
































Отзывы: