Thelin PARLOUR 3000, Руководство пользователя

Страница: 7 / 31

PARLOUR PELLET 3000 PELLET HEATER
7
start or "freshen up" a fire. Keep all such liquids
well away from the heater while it is in use.
Ashes must be disposed of in a metal container with
a tight-fitting lid and placed on a non-combustible
floor or ground, well away from all fuels, pending
final disposal.
NOTE: During the first few burns the high-
temperature paint and sealant used in manufacture
will emit some odor and smoke. Open doors and
windows to the outside for proper ventilation during
the first burn cycle and curing of the paint.
This heater, when installed, must be electrically
grounded according to local codes or, in the absence
of local codes, with the
National Electrical Code,
ANSI/NFPA 70-2020 .
Provide adequate clearances around air openings
into the combustion chamber and adequate
accessibility clearance for servicing and proper
operation. Never obstruct the front opening of the
heater.
The heater may be installed as a free-standing unit
mounted on a non-combustible protective floor pad
or hearth. Or it may be mounted into an existing
UL-approved wood stove chimney. Non-combustible
floor protection is required and must be used when
placing the heater on any combustible material.
All outside air hook-ups for mobile or modular
homes require Thelin Hearth Products’ outside air
kit — NO EXCEPTIONS!
CAUTION : Do not connect this unit to a chimney
flue serving another appliance.
WARNING : Do not install a flue damper in the
exhaust venting system of this unit.
Under EPA Emission test conditions as calculated
per CSA B415.1-22 this heater has shown to
deliver heat output at rates ranging from
14,387 to
28,172 Btu/hr.
U.S. ENVIRONMENTAL PROTECTION
AGENCY Certified to comply with 2020 particulate
emission standards using PFI APPROVED wood
pellet fuel.
FIGURE 1 - OVERALL DIMENSIONS