44
Setup Active unit for HA, take example unit HA1 (172.16.66.30):
i.
Login in to web UI of system 172.16.66.30 then go to “High Availability” HA
configuration page.
ii.
Click on “Active” radio button, then “Active Server” will be filled in this
system’s host name and IP address.
iii.
Filled in “Virtual Hostname” and “Virtual IP”, be sure while setup HA Standby
Unit has used same name and IP. In here, “thecusha” and “172.16.65.5” as
example accordingly.
iv.
Normally, no need to change iSCSI Block Configuration. If it has changed, be
sure the HA Standby Unit has done the same.
v.
Click “Save” to save HA Active unit configuration.
