29
30
31
32
Check the spacers are in their noted
posi�ons.
Carefully lower the inline panel back
into the channel and onto the spacers.
Ensure the panel is pushed �ght against
the return panel.
Check the spacers are in their noted
posi�ons.
Carefully lower the return panel back
into the channels and onto the spacers.
Ensure there is no gap at the front of
the under-frame.
Screw the brackets to the walls.
Evenly �ghten the screws un�l the
gaskets just “nipping” the glass.
Tighten all glass screws to 15.6N.
DO NOT fit the cover plates.
08/20
Assemble the 90° glass to glass
brackets back onto the panels. Evenly
�ghten the screws un�l the gaskets are
“nipped”.
Tighten all screws to 15.6N.
DO NOT fit the cover plates yet.
No Gap
No Gap
VIEW 07
07/2019 V 2.2
