13
14
15
16
Place the door supports evenly over
the frame.
Check the orienta�on against your door
direc�on.
With one person inside the enclosure,
posi�on the door onto the door
supports as indicated.
Using a spirit level, ensure the door is
ver�cal. Use spacers on the door
supports to achieve door alignment to
the inline panel.
04/20
Loosely assemble the 90° glass to glass
brackets. Evenly �ghten the screws
un�l the gaskets are “nipped”.
Tighten all screws to 15.6N.
DO NOT fit the cover plates yet.
Loosely assemble the two 90° glass to
wall hinges onto the doors. Take note
of which way your hinges move.
The face that a�aches to the wall
should be located inside the enclosure.
Tighten all glass screws to 15.6N.
OUTWARD Opening
INWARD Opening
O
utside enclosur
e
O
utside enclosur
e
Inward opening Outward opening
VIEW 07
07/2019 V 2.2
