17
18
19
20
05/20
First, check there is a gap of 9mm
between the edge of glass and �le and
a 6mm gap between the door and the
inline panel. If this is not achievable, a
bespoke door may be necessary.
9
Hole “B”
See step 20
Secondly, mark the accessible holes
where the hinges will be a�ached to
the wall.
If you have an INWARD opening door,
mark all 3 holes.
It is recommended to use masking tape
on the �les to mark.
Li� the door out and safely put to one
side.
If OUTWARD opening, use the template
on the last page to locate Hole “B”.
Use masking tape on the wall to mark
the measurements.
Tear Here
Tear Her
e
40mm
70mm
27mm
15mm
Hole “B”
See final page for full scale template
Loosely assemble the 90° glass to wall
brackets onto the return panel. The
face that a�aches to the wall should be
located inside the enclosure. Ensure
the hole centres align.
DO NOT fit the cover plates.
6mm Gap
(Handle Side)
9mm Gap
(Wall Side)
VIEW 07
07/2019 V 2.2
