THE SHOWER LAB PORTRAIT SLIDER, Руководство пользователя

Страница: 8 / 21

06/2021 V 1.0
PORTRAIT SLIDER
01/14
Ensure the base is level.
Measure the width of the opening
where the door is to be fitted.
Mark this measurement on the
Underframe bottom.
It is recommended to use masking tape
on the Underframe to mark your
measurement.
Cut squarely using a chop saw.
Use a fine toothed file to remove any
burrs, be careful not to damage the
surface finish.
Position the Underframe parallel to the
tray edge.
Determine how far back from the wall
you want the Header Bar to be
positioned. Take note of this distance
for later. Add 11mm to this distance.
This is the Underframe distance.
Header Bar Offset (HBO)=
Fix the Underframe into the correct
position. Peel off the backing strips
from the self adhesive tape and push
firmly into position.
HBO + 11mm
Shower Tray
X
01 02
03 04