06/2021 V 1.0
PORTRAIT SLIDER
7mm
Header Bar Packers
06/14
Using purpose built “Glass Lifters”,
position and sit the Inline Glass Panel in
the Underframe and on to the Spacers.
Place Header Packers in between the
Header Bar and the Inline Panel to pack
out the gap.
Secure the Inline Panel in place by
fixing the Panel Retainers to the Header
Bar with the supplied Screws.
Ensure the Retainers are spaced evenly
and the side marked 10 is facing
forwards.
Adjust the Hex Screw to ensure there is
a minimum of 7mm gap between the
head of the Screw and the Nut.
21
22
23
24
