23
4. Find which water sector is not spraying correctly from the nozzle. If the
slideway is the issue, adjust the position of slideway to have all the water
sectors free forward to the ice mold. If the water sectors are free, but some
sectors is not spraying properly, using a new tooth-brush, clean the gap of the
nozzle several times. The water sector should work normally.
5.
Another cleaning method; remove the slideway from the water bin.
6.
Find the sprinkler arm and raise it. Disconnect it from any water tube.
7.
A de-scaling solution can be prepared in a plastic basin with a Nickel-Safe Ice
Machine Cleaner. Mix 4oz (118ml) of the ice machine cleaner per 1 gallon
(3.7L) of warm water.
8.
Remove the sprinkler arm from the interior. Thoroughly clean the sprinkler
arm by soaking it in the basin filled with the de-scaling solution until it is free
of any deposit; use a soft brush to remove any thick or stubborn residue and to
help the dissolving action. Rinse under a stream of tap water.
9.
Wipe down the interior of the water bin with the de-scaling solution and warm
water. Rinse thoroughly with clear water.