TIP
TIP
Install a Single
Section of Shelving
(Figure A)
•
There are drilled holes on the bottom of the Shelf for ease
of installation.
•
The row of shelving closest to the middle should be installed
first.
(Figure A)
–
Flip the Shelf upside down to expose the holes with the back of the
Shelf toward you.
–
Insert the Shelf Connectors as shown.
(Figure B)
–
Flip the Shelf right side up and place the Shelf Connectors into the
Bracket notches.
(Figure C)
–
Repeat for the remaining Shelves.
Install Using Shelf Screws
(not shown)
Additional tool needed:
awl (or similar pointed tool)
•
Shelf Screws are an alternative to using Shelf Connectors.
They are used with Desk Tops and on rare occasions with Solid
Shelves when it is necessary for the Shelves to remain fixed.
–
Place the Desk Top on the Brackets and use a pencil to trace an
outline of the Brackets.
–
Take the Desk Top off the Brackets and flip it upside down on a solid
surface with the pencil marks visible.
–
Take a Bracket out of a Hanging Standard to use as a guide.
Place the Bracket over each Bracket outline on the Desk Top and
use an awl to punch a mark for the screws through each hole in the
Bracket. Be sure to keep the awl straight.
–
Remove the Bracket and use a 1/8" drill bit to drill a hole at each
punch mark.
–
Place the Desk Top on the Brackets and align the holes in the Shelf
with the corresponding Shelf Bracket holes.
–
Insert the shorter screw in the front hole and the longer screw in the
back hole of each Bracket.
–
Tighten each screw with a #2 Phillips head screwdriver.
Shelf Connector
away
from edge
Shelf Connector
away
from edge
Front Edge
Middle
Row
A
STEP
1
STEP
2
STEP
1
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
B
C
Installation Service
14
Visit
containerstore.com/installation
to view video instructions.
