The Container Store Elfa, Инструкции по простой установке и сборке

Страница: 9 / 16

TIP
TIP
Metal Tab
Knob
Locked
Metal Tab
Knob
Unlocked
containerstore.com | 800-733-3532
9
• Gliding Accessory Racks, elfa Classic Hanging Drawers and décor
Drawers are all installed with the same U-Shaped Metal Glide.
• If you would like more space between the gliding components,
simply move them to the desired position.
Drawer Clip
A
B
C
D
STEP 1
STEP 2
The U-Shaped Metal Glide has three metal tabs and a metal knob
on each side (located at the top of the glide) that locks the glide into
the Bracket.
–
Begin with the left Bracket. Align the metal tabs on the U-Shaped
Metal Glide with the cutout notches of the Bracket.
(Figure A)
– Once aligned, hold the front of the Bracket and press on the
U-Shaped Metal Glide at the back rounded corner until you hear it
lock into place.
(Figure A)
– Repeat on the right side.
Install the U-Shaped
Metal Glides
• To REPOSITION the U-Shaped Metal Glide: It is not necessary to
remove the glide from the Brackets. Simply tilt up the front of both
Brackets and remove them from the Hanging Standards. Place in the
desired location.
• To REMOVE the U-Shaped Metal Glide from the Brackets: Place
one hand at the back of the glide. With your thumb on the Hanging
Standard, gently push the glide forward with your fingers. At the
same time, insert and twist a small flat head screwdriver between
the Bracket and U-Shaped Metal Glide in front of the knob holding
the glide in place. The U-Shaped Metal Glide should pop out of the
Bracket. Repeat on the other side.
(Figure B)
• Gliding accessories that are side-by-side will share a Bracket at
the center.
Install the Gliding Accessories
– Align the rollers on each side of the frame with the openings in
the U-Shaped Metal Glide. Slide the frame into the glide.
(Figure C)
Drawers
– Always start with the bottom Drawer and work up.
– For décor Drawers, insert the Drawer into the frame opening and
attach it to the left and right side of the wood frame with the
provided Drawer Clips.
(Figure D)
– For Classic Hanging Drawers, simply insert the Drawer into the
frame opening.