AMC-400 Series Digital Transmitter with Smart Sensor 2
38
To inhibit this SEr operation enter Digital Transmitter Configuration; from normal operation the
user must push and hold the pushbutton for >2seconds
(“
SEL
”
) to enter “
-CF
”. Scroll through to
“
A03
” with short pushbutton presses, push and hold for >2seconds (“
SEL
”) and release to enter.
The title “
-du
” will be displayed. Scroll through to “
d07
”, push and hold for >2seconds (“
SEL
”)
and release to inhibit this SEr display action. In operation mode the Digital Transmitter display
will no longer show “
SEr
” until the next calibration schedule at which time both “
CAL
” and “
SEr
”
will be displayed along with the gas type and gas concentration. The Digital Transmitter will
operate with this configuration indefinitely.
The Digital Transmitter can be returned to original SEr display configuration by entering “
A03
”
and scrolling through to “
d08
”, push and hold for >2seconds (“
SEL
”) and release to enable
normal SEr display action during operation mode when sensor is requiring service.
