13
14
U
ser Manual
U
ser Manual
1. Fill the water tank with water:
Make sure that the H2O X5
® appliance
is unplugged.
Turn the water tank cap counter-clockwise approximately 90° to the
“OPEN” position and remove the cap as illustrated in Figs. 1a, b and c.
Hold the mop at a 45° angle as illustrated in Fig. 1d and add water in the
tank up to the MAX level by using the measuring cup.
Do not overfill. The maximum tank capacity is 400 ML/13.5 OZ.
Replace the water tank cap and turn clockwise approximately 90° to the
“CLOSE” position until the cap is tightened securely.
!
CAUTION
1a
1b
1c
45º
1d
1e
1f
1h
1g
1i
NOTICE
2
The H2O X5
®
appliance uses tap water. However, in areas with hard
water, distilled water should be used for better performance.
Make sure
the copper cone inside the water tank is always submerged in water
(As illustrated in Fig. 1i) while operating the H2O X5® appliance.
Never put cleaning detergents or scented products into the H2O X5®
appliance, other then H2O™ scents. Use of any other detergents or
scented products coud be unsafe and damage the unit.
2. Select one of the following Steam Regulator positions:
To avoid streaks and puddles select the appropriate setting for which
you will be using the H2O X5
®
appliance. For less steam use settings 1
and 2, for more steam use settings 3 and 4.
1 – Low, 2 – Medium, 3 – High and 4 – Hot Spray
• 1 – Low and 2 – Medium setting:
Ideal for cleaning all hard floors,
such as linoleum, ceramic, marble,
sealed hardwood, etc.
• 3 – High setting: Ideal for cleaning
carpets and rugs.
• 4 – Hot spray setting: Ideal for
cleaning bathrooms, kitchens,
window sills, car wheels, etc.
You can change the steam
regulator position and change the
steam output while operating the
H2O X5® appliance.
