9
10
U
ser Manual
U
ser Manual
3. Insert the curved handle into the
designated opening of the
extension handle until it gets
locked in place with the curved
handle locking button.
Make sure both parts, the
extension handle and the curved
handle, are secured in place before
usage.
4. Turn the lower cord wrap to align
the cord channel opening with the
cord channel in the extension
handle as illustrated in Fig. 4a.
Insert the power supply cord all
the way in its channel and turn the
lower cord wrap to lock the power
supply cord as illustrated in Fig. 4b.
Insert the power supply cord into
the cord holder located at the top
of the extension handle as
illustrated in Fig. 4c and then insert
power supply cord into the upper
cord wrap as illustrated in Fig. 4d.
5. Align the microfibre cloth with the
bottom of the mop head so that
the loops on the cloth meet the
griping strips on the mop head
(Refer to Fig. 5a). Press into place
to ensure that the microfibre cloth is
securely attached.
6. When using the H2O X5® appliance
on carpet surfaces:
Place the mop head, with microfibre
cloth in place, on top of the carpet
glider as illustrated in Fig. 6a.
Do not attempt to use the H2O X5®
appliance on carpet/rug surfaces
without the carpet glider in place.
3a
3b
4a
4b
4c
4d
6a
6b
Never use the carpet glider on surfaces that are prone to scratching.
Never assemble or remove the accessories while the unit is in operation.
NOTICE
!
CAUTION
5a
5b
