11
12
U
ser Manual
U
ser Manual
How To Use The
H2O X5
®
Steam Cleaner
PLEASE READ BEFORE USE
The H2O X5® Steam Cleaner is designed to thoroughly clean floor surfaces,
such as marble, ceramic, carpet, stone, linoleum, and sealed hardwood
floors and parquet. Not all floor types are suitable for steam cleaning.
The heat and steam action may remove the wax on surfaces treated with
wax. Do not use on unsealed flooring or let unit stand on any wood or heat
sensitive floor for an extended period of time. This could cause the wood
grain to rise, in addition to other types of damage.
When using on vinyl, linoleum or any other heat sensitive floors, use
extra caution. Too much heat can melt glue in the flooring. Use only on
laminated flooring that has been laid professionally and without any gaps
or cracks that would permit the entry of moisture.
Test the H2O X5® Steam Cleaner on a small isolated area of your flooring
prior to overall use on any floor surface.
Always check the use and care instructions of your flooring manufacturer
or distributor before using the H2O X5® Steam Cleaner.
When in doubt, please consult a flooring specialist. Only use the carpet
glider on carpeting and rugs. Use of the carpet glider on other floor
surfaces will cause streaking and possibly scratching.
This product emits steam and creates moisture. Water marks, discoloration
or damage to the floor surface can occur if the unit is left operating too
long in one place.
NOTICE
SAFETY PRESSURE RELEASE VALVE
The safety pressure release valve is designed to relieve pressure inside
the water heater, by discharging hot steam or water through the safety
pressure release valve, if the steam nozzle is blocked due to lime scale
build up.
The safety pressure release valve is located next to the steam nozzle on
the main body; please refer to the figure below.
Steam or water discharged from the
safety pressure release valve can be
very hot. At all times during use, always
make sure to keep body parts clear of
the safety pressure release valve to
avoid being burned by hot steam or
water in the event of discharge.
Discharge of steam or water from the safety pressure release valve is an
indication of an abnormal condition. In such cases, immediately stop
using the H20 X5® appliance, turn it off and unplug it from the outlet. Let
the unit cool down and clean the steam nozzle according to the cleaning
and maintenance section in this user manual. Once the lime scale has
been removed, the safety pressure release valve will no longer discharge
steam or water and the unit will begin to produce steam normally.
Note:
It is very important to remove lime scale on a regular basis. During
normal operation, no steam or water should be discharged from the safety
pressure release valve.
!
WARNING
safety
pressure
release
valve
steam
outlet
