Chapter 5: Configuration Items
NOTE
Thales recommends leaving configuration items at the their default value or setting
them to a valid value specified in the following table. If the value of a configuration item must
be changed and no valid values are given, contact
for assistance.
For more information about using configuration items see
"Configuration Items" on page 87
Configuration Item
Meaning
ET_HSM_NETCLIENT_HEARTBEAT
=[ON|OFF]
If
ON
, net client is to request and support heartbeat messages
from the network server.
Default=
OFF
ET_HSM_NETCLIENT_INACTIVITY_PERIOD_SECS
Number of seconds of no network activity before a connection
is considered inactive.
If heartbeat is enabled, a heartbeat message is sent to the
network server after this period expires, to keep the connection
alive.
Default=
60
ET_HSM_NETCLIENT_LOG_CHANNEL
Channel (destination) to write log entries to. Values are
platform-dependent.
For Windows, valid values are:
>
0
- Windows Event Log
>
1
- Standard out
>
2
- Standard error
Default=
0
For Unix, valid values are from
0
to
7
inclusive, and map to
syslog
LOG_LOCAL#
values.
Default=
0
ET_HSM_NETCLIENT_LOG_NAME
Name of application/context to associate with log entries.
Default=
etnetclient
ET_HSM_NETCLIENT_READ_TIMEOUT_SECS
Seconds to allow before timing out a TCP/IP read operation.
Default=
300
ET_HSM_NETCLIENT_SERVERLIST
=[host[:port] [host[:port]…]]
Space separated list of hosts (with optional port number) to
connect to.
Default host=
localhost
Default port=
12396
IPv6 addresses must be enclosed in square brackets.
ET_HSM_NETCLIENT_WRITE_TIMEOUT_SECS
Seconds to allow before timing out a TCP/IP write operation.
Default=
60
Thales ProtectServer 3 HSM and ProtectToolkit 7 Installation and Configuration Guide
2021-06-30 10:29:48-04:00 Copyright 2009-2021 Thales Group
92
