Datacryptor Ethernet User Manual
Element Manager Reference
1270A450-005 - June 2008
Page 55
•
Trace:
A report of internal software conditions detected by the unit, these are not
hardware errors but may help support personnel understand unusual operational
conditions. They appear on the display as ‘Internal Error’ but, when saved to disk as a
text file, the text is expanded. When seen, these should be reported to the Support
department at Thales e-Security for investigation.
Note:
New errors will cause the Error LED to flash. Once they have been read, the
Error LED will change to ON and stay on until they have been cleared out of the
log.
A list of all the
log and SNMP trap numbers
with descriptions is provided as an appendix to this
guide.
The
Logs
window provides facilities through three pull-down menus.
The
Log
menu provides:
•
Clear Entries
- clear all entries from the currently displayed log(s) - typically after saving
them first.
•
Save As
- save the currently displayed log(s) in a named file. You can then keep the file as a
backup, print it, or process as appropriate.
•
Close
- close the Logs Window and return to the Front Panel Viewer.
The
View
menu provides:
•
Audit
- If this option is ticked the all the Audit entries in the log are shown.
•
Error
- If this option is ticked then all the Error entries in the log are shown.
•
Trace
- If this option is ticked then all the Trace entries in the log are shown.
•
Key
Update
- If this is ticked then all the Key Update entries are shown.
•
Newest
First
,
Oldest
First
- select the order in which entries are displayed by clicking on
it. The selected order is indicated.
•
Find
- search through the displayed logs for specified text.
•
Refresh
- update the display by reading the logs from the unit again.
•
Stop Reading
(F6) – halts the process of reading entries from the audit log.
The function key F5 (Refresh) can also be used for the logs window.
The
Help
menu provides access to on-line help
All manuals and user guides at all-guides.com
