About This Document
Datacryptor Ethernet User Manual
Page 12
THALES
This manual is organized into the following sections:
Overview
provides general information on the hardware and software.
Background Information
provides a brief introduction to the device and Ethernet Layer 2
technology and terminology.
Installation
describes how to install the Datacryptor Ethernet hardware and Element Manager
Software.
Connecting to Datacryptor Ethernet Units
describes the main methods that can be used to
connect the PC to the Datacryptor Ethernet unit.
Element Manager Reference
provides an overview of the functions provided by the Element
Manager, followed by a detailed description of each in turn.
Appendix A: Device Maintenance
describes the periodic maintenance required on your Thales
Datacryptor Ethernet unit.
Appendix B: Loading Datacryptor Unit Software
describes how to load software into your
Thales Datacryptor Ethernet unit. Your Datacryptor will be supplied pre-loaded with software, so
you will only require the information in this appendix if a re-load or upgrade is needed.
Appendix C: Product Specifications
gives the system specifications.
Appendix D: Environment and Regulatory Information
describes the operating conditions
and regulatory certifications.
Appendix E: SFP and XFP Interfaces
describes the possible transceiver options.
Appendix F: Preventing Electrostatic Discharge
describes how to minimize the risk of ESD.
Appendix G: Troubleshooting
describes how to diagnose and repair common problems.
Appendix H: SNMP MIB Support
describes the SNMP MIBs supported by the device and the
location of them.
Appendix I: Log and SNMP Trap Numbers
provides a list of all the log and trap numbers
together with descriptions of their purpose.
Appendix J: Glossary
defines terms used in this document.
All manuals and user guides at all-guides.com
