- Inspect the wire rope / cable
- Inspect all bolted connections
Every 250 hours of operation:
- Change the engine oil and filter
Once per year or after 500 hours of operation:
- Check the guides for the level wind system. Replace if
necessary.
- Perform any trailer inspections as required by Federal or State
regulations.
Page 18
- Change engine fuel filters (primary clean screen, secondary
change filter)
Every 1000 hours of operation:
-Drain the engine coolant system and add proper anti-freeze
mixture.
- Maintain the hydraulic system (change filters)
Every 2000 hours of operation: - Maintain the hydraulic system (change oil & filters)
NOTE: Refer to the Yanmar engine manual for maintenance
instructions.
4.2
Hydraulic System:
4.2.1
Checking the Hydraulic Oil Level
The oil level of the hydraulic tank must be checked daily at the sight gauge on the side of tank.
The oil level control stick is located in the tank cap. Add oil if necessary.
4.2.2
Breather in Filler Cap of Hydraulic Oil Tank
The hydraulic tank aeration (filter) must be regularly cleaned free of dirt and dust in order to avoid
a blockage. The aeration filter is cleaned and washed with cleaning solvent. If necessary, replace
the filter.
4.2.3
Changing the Hydraulic Oil
