Page 12
Description of components:
Pos. 1 Ignition switch with 3 settings - Turn to the right
To start the engine, set the throttle lever (5) into medium speed
position. Set the winching lever (6) into “zero-position”
-
Turn the ignition key clockwise until the control lights switch on.
-
Turn the key to the next stage to activate the glow plugs for
the diesel engine. Control light (14) should be on.
-
When the light goes off, turn the key to the next stage and
the engine will start. Disengage the key as soon as the
engine starts to run.
Never leave the ignition key in the start position for
longer than 10 seconds in order to save battery life
and starter wear.
Never turn the ignition key to “start” when the
engine is running.
Control lights 11 and 12 should turn off when the engine runs.
Pos. 3 Control Light, Red - Stop
The red control light is switched on when the Emergency Stop button is
pressed, the dead-man´s switch is not pushed, or the set maximum limits
of the KPR 2000 has been reached and stopped the winching process.
Pos. 2 Control Light, Green - Operation
The green control light indicates proper function of the electric control
circuit.
Pos. 4 Emergency Stop Button
When the emergency stop button is pressed, the winching function will
be stopped immediately. Reset by turning left.
Caution
Use of the emergency stop is ONLY recommended in
emergency situations. It is NOT recommended to use
the emergency stop system for normal shut down of
the system.
