TH COMMUNICATIONS DoorProtect, Руководство пользователя

Страница: 7 / 12

TH COMMUNICATION SDN BHD www.thcomm.com.my info@thcomm.com.my
Setting Value
First field Detector name, can be edited
Room Selecting the virtual room to which the device is assigned
Primary Detector If active, the DoorProtect primary detector reacts to opening/closing
External contact enabled If active, the detector registers external detector alarms
Always active If active, the detector always registers opening/closing
Delay when entering, sec Selecting delay time when entering
Delay when leaving, sec Selecting delay time on exit
Delays in night mode Delay turned on when using night mode
Arm in night mode
If active, the detector will switch to armed mode when using night
mode
Alert with a siren if opening
detected If active, HomeSiren and StreetSiren are activated when the opening
detected
Activate the siren if an additional
contact is open If active, HomeSiren and StreetSiren are activated during an external
detector alarm
Signal Strength Test Switches the detector to the signal strength test mode
Detection Zone Test Switches the detector to the detection area test
Attenuation Test
Switches the detector to the signal fade test mode (available in
detectors with firmware version 3.50 and later)
User Guide Opens the detector User Guide
Unpair Device Disconnects the detector from the Hub and deletes its settings
Indication
Event Indication Note
Turning on the detector
Lights up green for about one
second
Detector connection to the
Hub, ocBridge, and
uartBridge
Lights up continuously for a
few seconds
Alarm / tamper activation
Lights up green for about one
second
Alarm is sent once in 5 seconds