4. Switch on the device
For the detection and interfacing to occur, the detector should be located within the
coverage area of the wireless network of the Hub (at a single protected object). Request
for connection to the hub is transmitted for a short time at the time of switching on the
device.
If the connection to the Ajax Hub failed, switch off the detector for 5 seconds and repeat the
attempt.
The detector connected to the hub will appear in the list of devices of the hub in the application.
Update of the detector statuses in the list depends on the device inquiry time set in the hub
settings, with the default value - 36 seconds.
Connecting the Detector to Third Party Security Systems
To connect the detector to a third party security central unit using the Ajax uartBridge or Ajax
ocBridge Plus integration module, follow the recommendations in the manual of the respective
device.
States
Devices → DoorProtect
