The installing the sensor
Before installing the detector, make sure that you have selected the optimal location and it is in
compliance with the guidelines contained in this manual!
1. Fix the SmartBracket attachment panels of the detector and magnet using bundled screws.
If using any other attachment hardware, make sure that they do not damage or deform the
panel.
The double-sided adhesive tape may be only used for temporary attachment of the detector
and magnet. The tape will run dry in course of time, which may result in falling of
DoorProtect and actuation of the security system. Furthermore, the device may fail from a
hit.
2. Put the detector on the attachment panel. As soon as the detector is fixed in SmartBracket, it
will blink with a LED - this will be a signal that the tamper on the detector is closed. If the
light indicator of the detector is not actuated after installation in SmartBracket, check the
