TGB X-MOTION 250, Руководство пользователя

Страница: 128 / 219

3-1-5 Spark Plug
Disassemble:
© Spark plug cap.
Note: Please blow away deposits around spark plug with blower before removing spark plug.
Otherwise, the dust may drop into cylinder and it can damage engine.
Inspection: Check if spark plug has carbon deposits, burned, or cracked. Use steel brush to
remove carbon deposits and adjust spark plug gap. Replace burned or cracked spark plug with
new one.
Note: Spark plug specification:
Spark plug gap: 0.6 ~ 0.7 mm. Warning: First
install the spark plug with hand, and then tighten it with
spark plug wrench. Please do not over twist the spark
plug. Note: Torque of spark plug: 100 ~ 120 kg-cm.
3-2 ELECTRIC SYSTEM
3-2-1 Ignition & Charging Device
1. Ignition Device:
CDI Unit of two ignitions per revolution is adopted.
The ignition Lead is 18°±374,000rpm (OLD)
15°±374,000rpm(NEW)
2. Charging Device:
Power is given by flywheel magneto. The voltage is controlled by voltage regulator.
Power is charged to battery.
A. Flywheel Magneto:
Flywheel (rotor) includes four poles, crossed N poles
and S poles. The stator consists of one high-tension
ignition coil and three low-tension coils for charging
and lighting to create change of magnetic field by
rotating the flywheel to generate electricity.
126
PDF created with pdfFactory Pro trial version www.pdffactory.com