6.2.4 OSCILLATE FEATURE
The OSCILLATE feature allows the user to program a repeating pattern to control the horizontal and vertical axes of the monitor. While
in the OSCILLATE pattern, the monitor will pause while the user changes the stream pattern. Pressing any other button will stop the
OSCILLATE pattern.
A label is supplied with each operator station that can be mounted on or near the station as a reminder of how to program the
OSCILLATE pattern. The OSCILLATE pattern needs to be programmed before use. The pattern will be cleared each time power is
cycled to the monitor.
6.2.4.1 PROGRAMMING
- Move monitor to starting point of pattern.
- Press & hold OSC button (~5 seconds) until LED blinks. Release button. LED will continue to blink while in program mode.
- Move monitor to 2nd point, press OSC button. LED will blink rapidly to acknowledge position.
- Repeat until pattern is complete (up to 65 points).
- Press & hold OSC button until LED turns off. Release button.
Figure 6.2.4.1
Operator Station Label
6.2.5 OPERATOR STATION PANELS
The operator stations are all equipped with the same monitor movement functions. From the operator stations, the operator can
command the monitor up, down, left, right and command the nozzle pattern shaper from fog to straight stream.
Fig 6.2.5
Operator Station Button Layouts
Read manual before use.
WARNING
®
®
OSCILLATE PATTERN PROGRAMMING:
1)
Move monitor to starting point of pattern.
2)
Press & hold OSC button until LED blinks. LED will continue to blink in program mode.
3)
Move monitor to 2nd point, press OSC button. LED will blink rapidly to acknowledge position.
4)
Repeat until pattern is complete.
5)
Press & hold OSC button until LED turns off.
NOTE: PATTERN WILL BE CLEARED UPON POWER LOSS.
TO OSCILLATE:
Press & release OSC button.
(Pattern must be programmed first.)
TO STOW:
Press & release STOW button.
(Programmable, refer to manual.)
Y5705
800-348-2686
www.tft.com
®
®
TASK FORCE TIPS
FIRE FIGHTING EQUIPMENT
28
®
®
POWER
AUX 2
Read manual before use.
WARNING
800-348-2686
Y5700
www.tft.com
FOG
STRAIGHT
STREAM
AUX 2
HOLD TO
PROGRAM
OSC
HOLD TO
PROGRAM
STOW
AUX 1
