21
20
Radio-controlled projection alarm clock with thermometer
7.2 Day-of-week/calendar week
• Press and hold the
DOWN
button to choose the language for the weekday.
• Language abbreviations change from one language to another: English (EN),
German (GE), French (FR), Italian (IT) and Spanish (SP).
• Press the
DOWN
button to choose weekday or week number display.
7.3 Temperature display
• Press the
°C / °F / WAVE
button to change between °C (Celsius) or °F (Fah-
renheit) as temperature unit.
7.4 Setting of time zone
• The time zone is used for countries where the DCF signal can be received but
the time zone is different from the DCF time (e.g. +1=one hour later).
• Press and hold the
UP
button for 2 seconds in normal mode (time/tempera-
ture display).
• “F” appears on the display.
• Press and hold the
MODE
button for 2 seconds.
• The hour digit is flashing. Press the
UP
or
DOWN
button to adjust hours to
your local time.
• Confirm with the
MODE
button.
• Press and hold the
UP
button for 2 seconds to return to normal mode.
7.5 Alarm setting
• Select your desired alarm by the
MODE
button:
– AL 1
– AL 2
• Set the alarm time in the desired alarm mode.
• Press and hold the
MODE
button and the hour digits are flashing.
• Press the
UP
or
DOWN
button to adjust the hours.
• Confirm with the
MODE
button. Set minutes in the same way.
• Confirm with the
MODE
button and the alarm is activated.
•
appears on the display.
• If necessary adjust the second alarm time in the same way.
Radio-controlled projection alarm clock with thermometer
• To activate or deactivate the alarm function press the
ALARM
button. , ,
+
or no alarm symbol is shown on the LCD.
• Once the alarm starts to ring, you can stop the alarm by pressing the
ALARM
button.
• You can activate the snooze function by pressing the
SNOOZE/LIGHT
button on
the top.
• Zz appears and the alarm will be interrupted for 4 minutes.
7.6 Dual time setting
• Press the
MODE
button three times in the normal mode.
• DUAL TIME and 0:00 appear on the display.
• Hold the
MODE
button for 2 seconds. The hour digits are flashing.
• Press the
UP
or
DOWN
button to adjust the hours.
• Confirm with the
MODE
button and set minutes in the same way.
• Confirm with the
MODE
button.
7.7 Projection and light
A.
For permanent projection connect the power adapter and slide the
CONTINUE
PROJECTION
switch upwards.
• Press the
TEMP/FLIP
button to turn the image by 180°.
• Turn the dial and set the focus.
• Hold the
TEMP/FLIP
button for three seconds and the projection toggles
between time and temperature every 5 seconds.
• Hold the
TEMP/FLIP
button for three seconds to deactivate the toggle.
B.
Without permanent projection (
CONTINUE PROJECTION
off)
• Press the
SNOOZE/LIGHT
sensor button.
• The backlight will be activated and the projection will turn on for a few seconds.
Note:
To avoid interference, the backlight and the projection turn off during the
reception of the radio controlled clock signal.
TFA_No. 60.5013_Anleit_04_20 02.04.2020 14:55 Uhr Seite 11
