13
12
Stop watch
5.4.2 Storing the split time
•
Start the stop watch with the
START/STOP
button. If the first
runner arrived at the destination, press the
LAP/SET/RESET
button and with the second runner the
START/STOP
button.
On the display you can read the time of the first runner and by
pressing the
LAP/SET/RESET
button the time of the second
runner. Press the
LAP/SET/RESET
button again to clear the
values.
6. Battery replacement
•
Change the battery when the display and/or the sound become
weak.
•
Open the battery compartment by unscrewing the five small
screws with a suitable screwdriver.
•
Remove the cover carefully.
•
Put a new battery LR 44 (+ pole above)
•
Before you screw the cover back on again, insert the hand
strap into the two slots.
7. Waste disposal
This product and its packaging have been manufactured using
high-grade materials and components which can be recycled and
reused. This reduces waste and protects the environment.
Dispose of the packaging in an environmentally friendly manner
using the collection systems that have been set up.
Disposal of the electrical device
Remove non-permanently installed batteries and
rechargeable batteries from the device and dispose
of them separately.
This product is labelled in accordance with the EU
Waste Electrical and Electronic Equipment Directive
(WEEE).
This product must not be disposed of in ordinary
household waste. As a consumer, you are required
to take end-of-life devices to a designated collection
point for the disposal of electrical and electronic
equipment, in order to ensure environmentally-com-
patible disposal. Observe the current regulations in
place!
Stop watch
5.3 Hourly chime
•
Press and hold the
LAP/SET/RESET
button while in normal
mode.
•
The adjusted alarm time appears on the display.
•
Press the
MODE
button at the same time to activate the hourly
chime.
•
Under all the icons of the day-of-the-week black highlights
appear.
•
The hourly chime is now activated.
•
To deactivate the hourly chime, press and hold the
LAP/SET/RESET
button and press the
MODE
button at the
same time to deactivate the function.
•
The black highlights disappear.
5.4 Stop watch function
•
Press the
MODE
button while in normal mode to enter the stop
watch mode. In the stop watch mode the black highlights are
flashing.
•
With the
START/STOP
button you can start and stop the
countdown.
•
Press the
LAP/SET/RESET
button to clear the countdown.
•
The total countdown will be 29 minutes and 59.99 seconds
and the indication of the counted time will be in 100th of a sec-
ond interval.
•
After the first 30 minutes the clock will automatically switch to
one second increment.
•
After that, the smallest unit will no longer be 100th of seconds
but only full seconds.
5.4.1 Split time measurement
•
Press the
START/STOP
button to activate the stop watch.
Press the
LAP/SET/RESET
button and the elapsed time will be
displayed. The stop watch is running in the background and by
pressing the
LAP/SET/RESET
button again, the current time
appears on the display. With this function, it is possible to
measure any number of split times from the start.
TFA_No. 38.2030 Anleit_11_21 22.11.2021 17:17 Uhr Seite 7
