Textron Tempo 525N-30 Скачать руководство пользователя страница 4

Страница: 4 / 48

Statement of Warranty

Tempo warrants this product to be free from defects in materials and

workmanship for a period of one (1) year from the date of shipment.

During the warranty period we will, at our option, either repair or

replace any product that proves to be defective. To exercise this war-

ranty, write or call your local Tempo representative, or contact Tempo

directly. You will be given prompt assistance and return instructions.

Send the instrument, transportation prepaid, to the indicated service

facility. Repairs will be made and the instrument will be returned

transportation prepaid. Repaired products are warranted for the bal-

ance of the original warranty period, or at least ninety (90) days.

Year 2000 Compliance

Tempo warrants that the 525 and its ReportWriter Software are

designed to be used after the calendar year 2000 A.D., and that the

Software will operate without error relating to date data, specifically

including any error relating to, or the product of, date data which rep-

resents or references different centuries or more than one century.

Limitations of Warranty

This warranty does not apply to defects resulting from unauthorized

modification or misuse of any product or part. This warranty also

does not apply to AC adapters, batteries, or damage from battery leak-

age.
This warranty is in lieu of all other warranties, expressed or implied,

including any implied warranty of merchantability or fitness for a par-

ticular use. Tempo shall not be liable for any indirect, special, or con-

sequential damages.

OPERATING MANUAL – 525N - 30 OLTS

Содержание Tempo 525N-30

















































Результаты поиска

Содержание Tempo 525N-30

Отзывы:

Похожие инструкции для Tempo 525N-30

Бренды по названию

Популярные бренды

Textron Tempo 525N-30, Руководство по эксплуатации

Результаты поиска

Содержание Tempo 525N-30

Отзывы:

Похожие инструкции для Tempo 525N-30

Бренды по названию

Популярные бренды