Textron POWER FINDER CIRCUIT SEEKER GREENLEE 2011/00521, Инструкция по эксплуатации

Страница: 17 / 24

17
2011
Tracing the Path of a Low Voltage Line
Electric shock hazard:
Contact with live circuits can result in severe injury or death. Use
only the plug and adapters provided with the 2011 when tracing
circuits.
Failure to observe this warning will result in severe injury or death.
Electric shock hazard:
Do not connect to voltage greater than 600 V AC/DC. Check circuit voltage before •
plugging in transmitter.
Connect ground or neutral first when using clip leads or adapters. Current flows
•
through both the hot and ground or neutral transmitter lead.
Failure to observe these warnings could result in severe injury or death.
To trace low voltage circuits (those typically of 50 volts or less), connect one side of the
transmitter adapter plug to a
known separate or earth ground.
Plug the transmitter into the
transmitter adapter plug.
Connect the other clip to the low
voltage conductor and turn the
transmitter ON.
Trace path by following step
4 under “Tracing the Path of a
Hidden Wire (Live Circuit).”