105
Press
Apply Preset
to set the
default address to the preset.
Note
Presets are not available for
Trigger On
Address/Data
.
4. Press
Address
from the side menu
to manually edit the triggering
address.
To edit the address, use the
Variable
knob to highlight a binary
or hex digit and press
Select
. Use
the
Variable
knob to choose a
value for the digit and press
Select
to confirm.
VARIABLE
Binary
0,1, X (don’t care)
Hex
0~F, X (don’t care)
Direction
1. Press
Direction
on the bottom
menu and choose the direction
from the side menu.
Direction
Write, Read, Read or Write
3-7-12-3. SPI Bus Trigger Settings
The SPI bus trigger conditions can be set at any time after the bus
setting has been set to SPI.
Panel Operation 1. Set the Bus to SPI in the bus
menu.
Page 79
2. Press the
Trigger Menu
key.
Menu
3. Press
Type
from the bottom menu.
4. Press
Others
from the side
menu and select
Bus
.
The Trigger on settings will be reflected on the
Trigger Configuration icon.
From left: Bus trigger, Trigger source
5. Press
Trigger On
and select the
triggering condition for the SPI bus.
SPI
SS Active, MOSI, MISO, MOSI&MISO
