INS467-9 43/47
status LED’s will indicate the status of all areas the user has access too.
For example in a two area system where one area is ARMED and one is DISARMED,
both the ARMED & DISARMED LED’s will be on. If the user then presses the DISARM
button, the area which is currently ARMED will be DISARMED, and vice versa.
If the user has control over three areas and only the DISARMED LED is illuminated,
it means that all areas the user is assigned too are DISARMED, pressing the ARM
key will arm all three areas.
N
Great care should be taken if the user is assigned to more than one area or
subsystem. It is not possible for the user to determine from the SmartKey™ which
areas are ARMED and which are DISARMED. It is important that in these situations
the user has access to an alternative means of setting and unsetting the system so
that the possibility of false alarms from the system are minimised.
Arm Fail Indication
If the system or any area assigned to a user fails to arm, all three alarm status
LED’s will flash to indicate an arm failure. In the case of users assigned to multiple
areas the whole system should be unset and each area investigated to determine
