INS467-9 29/47
e.g.,
01
.
Press the
A
/
A
key, if an error tone is generated then the receiver is
4.
not installed or configured correctly (see Receiver Installation above).
Press the power button
P
on the SmartKey™, the panel will generate an
5.
acceptance tone and the SmartKey™ is now assigned to the selected user.
If required, a user access code can also be assigned to user in the normal
6.
way.
SmartKey™
If a SmartKey™ is no longer required it must be unassigned from the system. To
remove a SmartKey™ from a user, proceed as follows:
Select engineer’s mode by entering the engineer code followed by
1.
N
/
N
then
N
.
Enter
80
to select the Program Users menu.
2.
Enter the two digit user number that you want to remove the
3.
SmartKey™from e.g.,
01
.
Press the
B
/
B
key, the panel will generate an acceptance tone and
4.
the SmartKey™is no longer assigned to the selected user. Note: If the
SmartKey™was assigned to user 02 onwards the user access code is also
deleted.
