INS467-9 23/47
the “Setup Users” Menu.
Ricochet and Premier Elite Series V2.xx firmware upgrades add additional
capabilities to the management of Premier Elite SmartKey™. In multiple
expander systems it is now possible to choose which zones (and therefore
expander) the Premier Elite SmartKey™ will use for its routing, LED and Aux
functions can also be changed within the “Setup Users” menu.
All users on the system can have a Premier Elite SmartKey™ a TAG and a code,
or any combination of them.
This section only deals with Premier Elite SmartKey™ learning and routing, all
other user programmable options can be found in INS176-8 or later Premier Elite
Series Installation Manual.
N
Great care should be taken when using large numbers of Premier Elite
SmartKey™, only one Premier Elite SmartKey™ per expander can be used by
the system at any one time, and on Multiple expanders systems, or large sites,
functionality should be checked in all areas of the site where the device may be
used.
Premier Elite SmartKey™ Routing
Premier Elite SmartKey™ should only be learned to the system AFTER all
devices have been learned and placed in their final location. Whilst it is possible to
learn at any point during the programming of the system, learning and testing the
functionality of the Premier Elite SmartKey™ after all devices have been placed
will ensure that the Premier Elite SmartKey™ performs as expected, and works
in locations where the user would expect it too.
Route By
The Route By function allows you to select which Zones (and therefore expander)
the Premier Elite SmartKey™ will use on the system for its routing. This should
be selected BEFORE the device has been learned.
In the examples below Fig 1 shows the zones associated with Expander 1, which is
a 32XP-W, and Fig 2 shows Expander 2 which is also a 32XP-W, when using 8XP-W
