INS467-9 21/47
Hybrid Mode
Hybrid mode is used to control the reporting functions for devices. When in this
mode devices are awake only when the system is set. Devices are woken up by the
control panel at the point of arming. The system will display "Preparing to Arm".
When the system is disarmed the devices will be put back to sleep. This mode of
operation is the default mode for all Dual Technology motion detectors.
N On very large systems (100 d) a small delay may be experienced when
arming the system, this is normal as the expanders on the system wake up the
relevant devices.
N Premier Elite DT-W should ALWAYS be used in Hybrid mode, failure to do this will
have an adverse affect on battery life.
Device Specific Mode
Device Specific mode is used to control the reporting functions for devices. Devices
that use this mode of operation have specific operating parameters and should not
be altered. This mode of operation is the default mode for all Fire detectors
(Smoke, Heat and any other variant), & Internal/External Sounders.
Expander O/P Mode
Expander O/P modes are for future use and should not be used with any of the
devices listed above.
Zone Types & Attributes
Detailed instructions for programming can be found in INS176-8 or later.
To Learn Devices through the Zone Setup menu please follow the diagram on the
next page.
