Premier Elite 8XP-W & 32XP-W Installation Manual
INS467-8
21
RSSI
Each value in the image below represents the RSSI levels in dBm (on V2 it is shown as %) at each of the
hops. If question marks appear on the display it means the information is not available.
Zone 00 PR
6>> 80>> 57 P
@
If question marks appear it could be because either the system has just been powered up and information has not
been collected yet, or on large systems the information is not in memory. To populate the display activate the
device and the information should appear.
Device Messages
Zone 00
Not Ricochet
The chosen zone does not have a Ricochet device learned to it.
Zone 00 PR
Msg ??? mins ago
shows the last time the device communicated this represents the last message and could be
a poll, activation or tamper etc.....
Zone 00 PR
>hr since msg
This is a warning showing that the last communication from the device was over an hour ago.
Zone 00 PR
No msg recvd yet
This display shows that no message has been received yet, this would normally be seen on a
recently powered up system, wait 15 minutes from power up before checking the diagnostics
information.
Signal Security™
Zone 00 Shock
????
This display shows information relating to signal security on an 8XP-W. 4 windows are
available to show information; each window represents two devices, (Odd & Even device
slots). Each window could show any of the information detailed in the table below
?
No information is available
_
The chosen device cannot “see” either of t
he devices
O
The chosen device can see the ODD device(s)
E
The chosen device can see the EVEN device(s)
B
The chosen device can see BOTH devices
Example
Zone 00 Shock
_OEB
In this example Zone 9 can see the devices as detailed below, use the scroll key to
view information about other devices:-
Display
_
O
E
B
Device
1
2
3
4
5
6
7
8
Can see
On the 32XP-W there are 16 windows to show information from the 32 devices of the system; the format is the
same.