Texecom Premier Elite 32XP-W, Руководство по установке, Страница: 18 / 32

Premier Elite 8XP-W & 32XP-W Installation Manual
18 INS467-8
Removing Detectors
If a detector is no longer required it must be unassigned from the system. To remove a detector from a zone,
proceed as follows:
1. Select engineer’s mode by entering the engineer code followed by 
/
 then  .
2. Enter  to select the All Zone Options menu.
3. Enter the two digit zone number that you want to remove the detector from e.g.,  .
4. Enter 

to program the zone type as Null . The panel will generate an acceptance tone and
the detector is no longer assigned to the selected zone.
Learning SmartKey™
All SmartKey™ must be assigned to one of the available users on the system. SmartKey™ will always be
learned to the last available slot on the receiver and work downwards. The users available will vary depending
on the control panel:
Control Panel Available Users
Premier 412 Users 1 to 31
Premier 816 Users 1 to 31
Premier 832 Users 1 to 63
SmartKey™ are assigned to users as follows:
1. Select engineer’s mode by entering the engineer code followed by

/

then

.
2. Enter

to select the Program Users menu.
3. Enter the two digit user number that you want to assign the SmartKey™ to e.g.,

.
4. Press the

/

key, if an error tone is generated then the receiver is not installed or configured
correctly (see Receiver Installation above).
Programming Menu
Enter Code > ??
Program ser ??
Enter ser No.??

Enter User
Number
??
Program ser ??
Code : ******
Enter Engineers code
Then press then
????
  
Acceptance Tone
from Panel
 
Program ser ??
Activate Devic20
Programming Menu
Enter Code > ??
All Zone Options
Enter Zone No.??

Enter Zone
Number
??
Zone ?? Type
??????
Enter Engineers code
Then press then
????
  
Acceptance Tone
from Panel
