Texas Snowbuster 1100E, Руководство пользователя

Страница: 18 / 22

18
 The gap should be 0.70 - 0.80 m. Correct the gap, if necessary, by carefully bending the
side electrode
F7RTC or equivalent
 Mount the spark plug carefully, by hand, to avoid cross-threading.
 After the spark plug seats, tighten with a spark plug wrench to compress the water. If
reattaching a used spark plug, tighten 1/8 - 1/4 turn after the spark plug seats. If installing a
new spark plug, tighten 1/2 turn after the spark plug seats.
 Attach the spark plug cap.
NOTICE:
An incorrect spark plug can cause engine damage.
Idle speed adjustment
How to:
 Start the engine
 Move the lever to the lower throttle position (turtle).
 Turn the throttle adjusting screw to obtain the standard idle speed.
Standard idle speed: 1,800 rpm ± 1500 rpm
Sediment cup
The sediment cup prevents dirt and water from entering the carburetor. If the engine has not been
engaged over a period time, the sediment cup should be cleaned before use.
How to:
 Turn the fuel valve to the Off position.
 Remove the sediment cup using a 10 mm wrench.
 Remove the o-ring and filter.
 Clean each of the parts in a high flash-point solvent.
 Reinstall the filter, o-ring, and sediment cup.

Tighten with 10 mm wrench to secure.
 Return the fuel valve to the on position and check for leaks
0.70-0.80
mm