16
If your neighbour has a robot lawnmower from another manufacturer, it may be necessary
to keep a distance of 2 m from your neighbour’s boundary cable to avoid interference.
The mowing area of the TEXAS Smart G-Force SB900 is up to 900 m
2
.
There is a limit to the maximum distance that the robot can be from the boundary cable.
It cannot be further than 22.5 m away from the boundary cable, otherwise the signal will be
too weak.
Setting the mowing height
The robot lawnmower’s mowing height can be set to 20–60 mm.
If the grass is higher than 60 mm, it will be necessary to mow the grass using a standard
lawnmower, otherwise the grass will cause too great a load for the robot’s blades and thus
lead to unsatisfactory mowing.
It can be a good idea to begin with by setting the mowing height to 60 mm and then
gradually lowering the mowing height, until you get the grass height that you desire.
The mowed grass height can be set by first pressing the STOP button, so that the top
cover opens.
The mowed grass height can be set by turning the selector (see image).
The robot lawnmower can mow wet grass, but this will lead to clumps of grass forming
under the robot, cause greater friction on the blades and generate extra noise.
However, you can easily remedy this by cleaning off the grass using a soft brush.
(ALWAYS set the main switch to the OFF position before working with the blades.)
