Texas Instruments TLV320AIC3109EVM-K, Руководство пользователя

Страница: 7 / 67

www.ti.com
EVM Description and Basics
7 SLAU738 – September 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
TLV320AIC3109EVM-K
2.1.2 USB-MODEVM Default Setting
Table 3 provides a list of the SW2 settings on the USB=MODEVM. For use with the TLV320AIC3109EVM,
set SW-2 positions 1 through 7 to ON, and set SW-2.8 to OFF.
Table 3. USB-MODEVM SW2 Settings
SW-2 Switch
Number
Label Switch Description
1 A0 USB-MODEVM EEPROM I
2
C Address A0
ON: A0 = 0
OFF: A0 = 1
2 A1 USB-MODEVM EEPROM I
2
C Address A1
ON: A1 = 0
OFF: A1 = 1
3 A2 USB-MODEVM EEPROM I
2
C Address A2
ON: A2 = 0
OFF: A2 = 1
4 USB I
2
S I
2
S Bus Source Selection
ON: I
2
S Bus connects to TAS1020
OFF: I
2
S Bus connects to USB-MODEVM J14
5 USB MCK I
2
S Bus MCLK Source Selection
ON: MCLK connects to TAS1020
OFF: MCLK connects to USB-MODEVM J14
6 USB SPI SPI Bus Source Selection
ON: SPI Bus connects to TAS1020
OFF: SPI Bus connects to USB-MODEVM J15
7 USB RST RST Source Selection
ON: EVM Reset Signal comes from TAS1020
OFF: EVM Reset Signal comes from USB-MODEVM J15
8 EXT MCK External MCLK Selection
ON: MCLK Signal is provided from USB-MODEVM J10
OFF: MCLK Signal comes from either selection of SW2-5
Table 4 provides a list of USB-MODEVM jumpers found on the EVM.
Table 4. USB-MODEVM Jumpers
Jumper Default Position Jumper Description
JMP1 Installed Connects analog and d5-V supplies
JMP2 Open Connects analog and digital grounds
JMP3 Open Connects I2C SDA pullup to IOVDD
JMP4 Open Connects I2C SCL pullup to IOVDD
JMP5 2-3 When connecting 2-3, SS comes from FSX; when connecting 1-2, SS
comes from CNTL
JMP6 1-2 When connecting 1-2, +5 VD comes from USB; when connecting 2-3, +5
VD comes from U2
JMP7 1-2 When connecting 1-2, MCLKI comes from USB; when connecting 2-3,
MCLKI comes from AVSS and DVSS
JMP8 Open Connects resistor across EXT MCLK