Texas Instruments TLV320AIC3109EVM-K Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 67

background image

TLV320AIC3109EVM-K Setup and Installation

12

SLAU738 – September 2017

Submit Documentation Feedback

Copyright © 2017, Texas Instruments Incorporated

TLV320AIC3109EVM-K

3

TLV320AIC3109EVM-K Setup and Installation

The following section provides information on using the TLV320AIC3109EVM-K, including set up, program
installation, and program usage.

NOTE:

If using the EVM in stand-alone mode, the software should be installed per

, but

the hardware configuration may be different.

3.1

Software Installation

1. Download the latest version of the

TLV320AIC310xEVM-K GUI

.

2. Unzip the installation file by clicking on the self-extracting zip file.

3. Install the EVM software by double-clicking the Setup executable and follow the directions. The user

may be prompted to restart their computer.

4. Install the most up-to-date version of National Instrument’s VISA™ drivers.

5. For Windows 7 and above operating systems, download and install the

USB-MODEVM Windows

XP/Vista/7 Drivers

.

3.2

EVM Connections

1. Ensure that the TLV320AIC3109EVM is installed on the USB-MODEVM Interface board, aligning J1,

J2, J3, J4, and J5 with the corresponding connectors on the USB-MODEVM.

2. Verify that the jumpers and switches are in their default conditions.

3. Attach a USB cable from the PC to the USB-MODEVM Interface board. The default configuration will

provide power, control signals, and streaming audio via the USB interface from the PC. On the USB-
MODEVM, LEDs D3–5 and D7 should light to indicate the power is being supplied from the USB.

4. For the first connection, the PC should recognize new hardware and begin an initialization process.

The user may be prompted to identify the location of the drivers or allow the PC to automatically
search for them. Allow the automatic detection option.

5. Once the PC confirms that the hardware is operational, D2 on the USB-MODEVM should light to

indicate that the firmware has been loaded and the EVM is ready for use. If the LED is not lit, verify
that the drivers were installed by trying to unplug and restart at Step 3. If further problems are found,
please refer to the

TLV320AIC3xEVM-PDK Series Troubleshooting Guide

After the TLV320AIC3109EVM software installation is complete, evaluation and development with the
TLV320AIC3109EVM-K can begin.

«
...
10
11
12
13
14
...
»

Содержание TLV320AIC3109EVM-K




































































Отзывы:

Нет отзывов

Похожие инструкции для TLV320AIC3109EVM-K

Бренд: Lawler Страницы: 2

Бренд: Lawler Страницы: 6

Бренд: Data Aire Страницы: 28

Бренд: Icom Страницы: 30

Бренд: ICM Controls Страницы: 2

Бренд: ICM Controls Страницы: 2

Бренд: ray Страницы: 11

sensoCOMFORT VRC 720/3

Бренд: Vaillant Страницы: 64

Cutler-Hammer Jockey

Бренд: Eaton Страницы: 12

RM-LUM-M320-IT/A

Бренд: Grosvenor Страницы: 2

Calc-An-Acre II

Бренд: micro-trak Страницы: 30

Ecomat100 CR1055

Бренд: IFM Страницы: 32

Бренд: SMC Networks Страницы: 15

Бренд: jbc Страницы: 16

TITAN CONTROLS KRONUS 2

Бренд: Sunlight Supply Страницы: 4

MOVIFIT SC series

Бренд: SEW Страницы: 148

Бренд: Computherm Страницы: 40

Бренд: M-E Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды