Figure 5-21. Register Map
The GUI displays two registers even though there is only one configurable register in the TLA2024 device. For
the firmware to remain in synchronization with the GUI, all communication is first directed to a pointer register
internal to the device and either points to the conversion register or the configuration register.
Configuration of the TLA2024 device is accomplished using the drop-down menu and click options shown in the
Field View
on the right side of the GUI window. It is also possible to double-click on the various bits to toggle the
bit settings. As the bit settings change, the
Field View
options will also change to correspond to the selection.
Figure 5-22. TLA2024 Configuration
TLA2024EVM-PDK GUI
28
TLA2024EVM-PDK User's Guide
SBAU368 – FEBRUARY 2021
Copyright © 2021 Texas Instruments Incorporated
