30
Device is
incorrectly
configured
This hub has been
located, but one
or more
configuration
parameters are
set incorrectly.
•
Repeat the Add Hubs procedure to
reconfigure this hub.
•
Remove the hub and then add it back into the
network.
The device did
not respond
The hub was
previously added
to the classroom
network, but was
not located at this
time.
•
The access point was not found.
•
The hub’s network connector is removed.
•
The hub is too far away from the access point.
Try to keep the hubs within 70 feet of the
access point.
•
If you changed the channel, try removing all
the hubs and then adding all the hubs back
into the network.
Problem or
message
Possible causes or solutions