69
MSP430G2533, MSP430G2433, MSP430G2333, MSP430G2233
MSP430G2403, MSP430G2303, MSP430G2203
www.ti.com
SLAS734G – APRIL 2011 – REVISED APRIL 2016
Submit Documentation Feedback
Product Folder Links:
MSP430G2533 MSP430G2433 MSP430G2333 MSP430G2233 MSP430G2403 MSP430G2303
MSP430G2203
Device and Documentation Support
Copyright © 2011–2016, Texas Instruments Incorporated
User's Guides
MSP430x2xx Family User's Guide
Detailed information on the modules and peripherals available in this
device family.
Code Composer Studio v6.1 for MSP430 User's Guide
This manual describes the use of TI Code
Composer Studio IDE v6.1 (CCS v6.1) with the MSP430 ultra-low-power microcontrollers.
This document applies only for the Windows version of the Code Composer Studio IDE. The
Linux version is similar and, therefore, is not described separately.
IAR Embedded Workbench Version 3+ for MSP430 User's Guide
This manual describes the use of
IAR Embedded Workbench (EW430) with the MSP430 ultra-low-power microcontrollers.
MSP430 Programming With the Bootloader (BSL)
The MSP430 bootloader (BSL, formerly known as
the bootstrap loader) allows users to communicate with embedded memory in the MSP430
microcontroller during the prototyping phase, final production, and in service. Both the
programmable memory (flash memory) and the data memory (RAM) can be modified as
required. Do not confuse the bootloader with the bootstrap loader programs found in some
digital signal processors (DSPs) that automatically load program code (and data) from
external memory to the internal memory of the DSP.
MSP430 Programming Via the JTAG Interface
This document describes the functions that are required
to erase, program, and verify the memory module of the MSP430 flash-based and FRAM-
based microcontroller families using the JTAG communication port. In addition, it describes
how to program the JTAG access security fuse that is available on all MSP430 devices. This
document describes device access using both the standard 4-wire JTAG interface and the 2-
wire JTAG interface, which is also referred to as Spy-Bi-Wire (SBW).
MSP430 Hardware Tools User's Guide
This manual describes the hardware of the TI MSP-FET430
Flash Emulation Tool (FET). The FET is the program development tool for the MSP430 ultra-
low-power microcontroller. Both available interface types, the parallel port interface and the
USB interface, are described.
Application Reports
MSP430 32-kHz Crystal Oscillators
Selection of the right crystal, correct load circuit, and proper board
layout are important for a stable crystal oscillator. This application report summarizes crystal
oscillator function and explains the parameters to select the correct crystal for MSP430 ultra-
low-power operation. In addition, hints and examples for correct board layout are given. The
document also contains detailed information on the possible oscillator tests to ensure stable
oscillator operation in mass production.
MSP430 System-Level ESD Considerations
System-Level ESD has become increasingly demanding
with silicon technology scaling towards lower voltages and the need for designing cost-
effective and ultra-low-power components. This application report addresses three different
ESD topics to help board designers and OEMs understand and design robust system-level
designs: (1) Component-level ESD testing and system-level ESD testing, their differences
and why component-level ESD rating does not ensure system-level robustness. (2) General
design guidelines for system-level ESD protection at different levels including enclosures,
cables, PCB layout, and on-board ESD protection devices. (3) Introduction to System
Efficient ESD Design (SEED), a co-design methodology of on-board and on-chip ESD
protection to achieve system-level ESD robustness, with example simulations and test
results. A few real-world system-level ESD protection design examples and their results are
also discussed.
