Texas Instruments MSA025, Руководство пользователя

Страница: 1 / 16

1 SLVUAY9 – November 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
TPS3808G01-Q1EVM (MSA025) Voltage Supervisor User Guide
User's Guide
SLVUAY9 – November 2016
TPS3808G01-Q1EVM (MSA025) Voltage Supervisor User
Guide
This user’s guide describes the TPS3808G01-Q1EVM evaluation module (EVM). This guide contains the
EVM schematic, bill of materials (BOM), assembly drawing, and top and bottom board layouts.
Contents
1 Introduction
...................................................................................................................
2
2 Schematic, Bill of Materials, and Layout
.................................................................................
2
3 EVM Connectors
.............................................................................................................
7
4 EVM Setup and Operation
.................................................................................................
7
List of Figures
1 TPS3808G01-Q1EVM Board
..............................................................................................
2
2 TTPS3808G01-Q1EVM Schematic
.......................................................................................
3
3 Component Placement—Top Assembly
..................................................................................
5
4 Component Placement—Bottom Assembly
..............................................................................
5
5 Layout—Top
..................................................................................................................
5
6 Layout—Bottom
..............................................................................................................
5
7 Top Layer
.....................................................................................................................
5
8 Bottom Layer
.................................................................................................................
5
9 Top Solder Mask
.............................................................................................................
6
10 Bottom Solder Mask
.........................................................................................................
6
11 TPS3808G01-Q1 RESET Asserted Due to MR Pulled Low
...........................................................
8
12 TPS3808G01-Q1 RESET Deasserted Due to MR Pulled High, With Delay t
D
, C
T-
Floating
.......................
8
13 TPS3808G01-Q1 RESET Deasserted Due to MR Pulled High, With Delay t
D
, C
T
Tied to GND Through
100-pF capacitor
.............................................................................................................
8
14 RESET Asserted Due to SENSE Voltage Falling Below V
IT
...........................................................
9
15 RESET Deasserting Due to SENSE Voltage Rising Above V
IT
, C
T
is floating
.......................................
9
16 RESET Deasserting Due to SENSE Voltage Rising Above V
IT
, C
T
Tied to GND Through 100-pF Capacitor
...
9
List of Tables
1 BOM
..........................................................................................................................
3
2 Test Points
....................................................................................................................
7
3 List of Onboard Jumpers
...................................................................................................
7
4 Nominal Supply and Typical Threshold Voltages
........................................................................
7
Trademarks
All trademarks are the property of their respective owners.